Effective elastic modulus determination of undirectional composite for stochastic geometric characteristics of fiber
A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
Подобные документы
The main advantages and disadvantages of well-known spiral drills with a multi-stage blade. It is described that the bridge, together with the steps adjacent to the grooves, is a small centering drill, performs centering and drilling during the process.
статья, добавлен 10.02.2021Intensive deformation of the elastic system of the machine - specific features of the cutting process. Circumcision of the gear with a disk the cutter in the continuous circular movement of the pinion - essence of the radial-circular cutting mode.
статья, добавлен 14.09.2016Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016Surface-polymer flooding (the so-called micellar polymer flow) as a potentially advanced oil recovery technology is more effective than polymer flooding. Surface-active interaction and compatibility of the polymer. Distinctions, drawbacks of the method.
статья, добавлен 06.05.2018Formulation of the problem of calculating the scalar potential of the electric field in the axisymmetric disk, the material which has anisotropic permittivity. The method of successive approximations, a description of the potential of the electric field.
статья, добавлен 30.08.2016Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019Research of mathematical model of the process intrusion forming polymer products. Establishing a dependency on the angle of melt costs lifting screw injection unit in the material cylinder based on the geometric parameters of extrusion head and mold.
статья, добавлен 18.02.2016Algorithm for determination of transfer function models for transient processes from noisy data with continued fraction approximations is proposed. Presented method allows to solve the stability problem of low-order continued fraction approximations.
статья, добавлен 26.06.2016Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014Determination of torque on the shaft of auger intensifier, power consumption, energy intensity and productivity of the backfilling workflow. Evaluation of soil properties, geometric parameters of the screw intensifier and speed of the bulldozer.
статья, добавлен 01.12.2017Familiarization with layout of placement of guard signaling complex systems. Research technology of modeling discrete continuous stochastic systems. Characteristics of the main methods ensuring probability of successful fulfilment of seismic sensor.
статья, добавлен 30.01.2016The types of dosimeters: silicon-diode detectors, diamond detectors, liquid ion chambers and radiographic films. The spatial resolution as a key feature for next-generation dosimeters. Results using one layer of DOSIORT. Isodose curves in the test.
статья, добавлен 12.10.2013Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021Technology of iron-concrete products. Optimization of experiment in chemistry and chemical technology. Blocks from rocks for facing, architectural-construction, memorial and other products. Methods of determining water absorption and frost resistance.
статья, добавлен 29.07.2021Searching for cheap and effective corrosion protection methods. Research on the possibility of using "green inhibitors" as anti-corrosion measures. Characterization of the properties of the complex of inhibitors, alkaloids and tannins included in plants.
статья, добавлен 04.07.2022Creep and fatigue in polymer matrix composites. Stages, characteristics and deformation of creep. Mechanisms of creep. General creep equation. Dislocation, nabarro-herring, coble creep. Creep of polymers, of concrete. The molecular weight of the polymer.
курсовая работа, добавлен 02.02.2015Hydrothermal sol-gel synthesis of hexagonally ordered silicas using a hybrid template system is reported. Silicas were characterized by IR spectroscopy, X-ray diffraction techniques as well as electron microscopy. The hexagonal structure of MCM-41.
статья, добавлен 30.07.2016System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016Comparison of the results of processing arrays light absorption alternate method of incorporating calibration surface with other methods. Determination of Ni2 +, Co3 +, Fe2 +, Cu2 + from 1-(2-pyridylazo)-2-naphthol in aqueous-micellar environment.
статья, добавлен 23.02.2016The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Defining of dimensional relationships where the aspect ratio. The building process for 3D microdevices. The features of creation surface energy high enough to maintain adhesion of the electroplated material until completion of the plating process.
реферат, добавлен 16.04.2017