Effective elastic modulus determination of undirectional composite for stochastic geometric characteristics of fiber
A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
Подобные документы
Nonaxisymmetric boundary value problem of elasticity theory for multiconnected body with cylindrical boundaries. Boundary conditions by the generalized Fourier method. The numerical analysis of stresses in the areas of their greatest concentration.
статья, добавлен 30.10.2016Information about the general state of technologies for the utilization of secondary energy resources and environmental resources. The essence of phase transitions in food production technologies. The possibility of creating energy-material circuits.
статья, добавлен 10.06.2022Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
статья, добавлен 19.03.2024Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013- 80. Principles of calculation of piezoelectric elements with surfaces partial covering by electrodes
Description of stress-strain state and transfer characteristics of piezoelectric elements with partial surfaces electrogalvanism. The power method of the analysis of the physical condition of the piezoelectric elements in the mode of forced oscillations.
статья, добавлен 30.08.2016 The main criteria for the quality of a pile coating, obtained by electro-floating. Experimental data obtained on a sample of nylon pile used in applying pile coatings by electro-floating method, which prove the efficiency of the proposed method.
статья, добавлен 30.08.2020Comprehensive analysis of allelic protein variants suitable for use in bakery products made from Iraqi wheat varieties, as well as biological evaluation of these varieties using a genetic source using a general method of qualitative grain selection.
статья, добавлен 18.03.2021Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016- 85. Substantiation of the fashion system as the concept of fashion conduct in modern consumer society
Determination of the principles of formation of fashion innovations in society in the context of the functioning of the modern fashion system. Characteristics of fashion innovations as objects of the fashion system and means of fashion communication.
статья, добавлен 05.05.2022 Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016The sustained propagation of combustion fronts in porous media is as a condition for the success of in situ combustion for oil recovery. The analysis of a method for modeling the propagation of combustion fronts in porous media. Problem of loss of a heat.
статья, добавлен 20.05.2013Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018The service designed to facilitate the process of SCs, with demonstrating its elements in particular, database and knowledge base, arrangement of information for various users. In the authors’ opinion, such services will become a step towards no sphere.
статья, добавлен 13.10.2022Strength is assumed - index for materials which can take standard, calculated values. Significant dependence between bending resistance, absolute size of structural elements. The structure of the wood fibers - factor which determine timber quality.
статья, добавлен 25.12.2016Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Determination the rigidity of constructive elements involved into the rated diagram of electromechanical system of the drive of spherical mill. Defining the rigidity of the elements entering a kinematic circuit of any electromechanical systems of drives.
статья, добавлен 28.11.2016Study of problems the sufficient conditions for the existence of solutions of linear nonhomogeneous impulsive boundary value problems with small perturbations when generating boundary value problem of impulsive has solutions for arbitrary right-hand side.
статья, добавлен 30.01.2017Особенности применения SPH-метода (Smoothed Particle Hybridization Method) для моделирования взаимодействия шин сверхнизкого давления с растительным покровом. Значения ширины шин для средств химизации при работе на почвах с низкой несущей способностью.
статья, добавлен 28.09.2016Test the tribological properties of lubricants as the main stage of assessing their suitability for use in friction. The scheme of the "cone - three ball" with the use of objects of simple geometric shapes to test different construction materials.
статья, добавлен 29.01.2016- 96. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 - 97. Finding the conditions of hydrocarbons safe storing and transportation in tanks of different shapes
Application of the software package ConvEx in the design of storage tanks for petroleum products prone to self-degradation. Investigation of the influence of the geometric shape of the vessel on the critical temperature of storage of petroleum products.
статья, добавлен 10.05.2018 The present study is a mathematical modeling aimed at the dynamic force analysis of printed circuit boards in order to eliminate dynamic stresses to an acceptable level and ensure the strength and reliability of the printed circuit board design.
статья, добавлен 02.06.2022Analysis of the artistic and compositional characteristics of Ukrainian traditional embroidery and other works of decorative and applied art for decorating current clothing models in ethnostylistics. Designing author's models of modern clothing.
статья, добавлен 05.04.2023Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016