Study of the effect of substrate on 3d surface roughness in diamond-like-carboncoating process
The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.
Подобные документы
The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016NbN and Nb-Si-N films were deposited by magnetron sputtering the Nb and Si targets on silicon wafers at various bias voltage. The films were annealed to establish their stability. The films were nanostructured represented an aggregation of crystallites.
статья, добавлен 30.07.2016Studies on the preparation of pasty high-filled compositions and evaluation of their rheological properties using a rotational visco-meter "Reotest-2" on the cone-plane system. Evaluation of sedimentation resistance of compositions and their flow.
статья, добавлен 30.10.2016Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016Directions of development of production technology of high-precision parts. Research in the field of management precision and quality parameters of the treated surface. Improvement of the technological process, equipment, instruments and devices.
статья, добавлен 06.12.2016Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016The study of the Microbiology of the procedure of biological fermentation, physico-chemical characteristics of activated sludge of the Bortnichy station of aeration. Offer possible ways to increase the speed of the procedure of biological fermentation.
статья, добавлен 27.11.2016Impact indicators coal shiites in the properties of the resulting coke. Coking process with the help of passive experiment. Effect of changes in the number of components of the coal charge on the quality of the coke at various technologies of sintering.
статья, добавлен 29.07.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.2016Grinding machine and its use for finishing workpieces, which must demonstrate high surface quality and high accuracy of shapes and sizes. Roughing operations in which grinding removes large volumes of metal fairly quickly. The components of machine.
статья, добавлен 10.03.2019Aniline and its polymerization on cotton fabric to produce conductive cotton by chemical polymerization. Polyaniline is one of the electrically conductive polymers. Polymerization using several concentrations of aniline (ANI) and hydrochloric acid.
статья, добавлен 15.01.2021Methods of the equation of the cutting edge in the absolute coordinate system. A helix - a trace of movement of the cutting tool along the workpiece. Characteristics of the mathematical model of the formation of the microrelief surface when grinding.
статья, добавлен 06.05.2018The importance of packaging in the production and sale of cheese. Ways to extend the shelf life without loss of useful properties of the product. History and vacuum packaging function. Nanocomposites in modern packaging. Utilization of the container.
реферат, добавлен 04.03.2016Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014Scientific justification for automated control method of optimal charge of pebble mill operating in series with a magnetic separator in the second stage of crushing in magnetic separating plants that process on iron ores with varying physical properties.
статья, добавлен 23.03.2016The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Character of force of friction is investigated and set in nominally-immobile connections on the stage of nominal adhesion and to passing to skidding. The capacity of connections are given by the method of coating on the basis of fusible to the alloy.
статья, добавлен 27.07.2021The development of a new functional proposition, which uses the Poisson and Weibull distribution components, to simulate a functional U-shaped function. Estimating the effectiveness of the developed functional representation by numerical examples.
статья, добавлен 12.02.2019Processes of change of mechanical properties and microtexture of castings from gazars. Effect of monolithic areas formation inside the porous structure. Consideration of monolithic formations inside porous structure of gazar after annealing, x 50.
статья, добавлен 30.01.2016Environmental problems in the process of industrial chemical production. Description of ways of processing and recycling of industrial organochlorine waste in the production of dichloroethane and vinyl chloride with the return: recycling of raw materials.
статья, добавлен 07.12.2016