Study of the effect of substrate on 3d surface roughness in diamond-like-carboncoating process
The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.
Подобные документы
Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016- 3. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
статья, добавлен 29.07.2017The history of iron and Damascus steels through the eyes of ancient blacksmiths. Observation of color changes during heating and estimating of hardness by scratch tests, to have determined some key parts of the present-day iron-carbon phase diagram.
статья, добавлен 09.09.2012The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
статья, добавлен 02.11.2018Experimental heat treatment of coal from the Shoptykol deposit of the Maikuben basin by carbonization, activation in a pilot laboratory unit. Analysis of the adsorption characteristics of the samples. Approbation of the obtained activated carbon.
статья, добавлен 28.12.2020Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.
презентация, добавлен 30.06.2014Investigation of the surface layer structure at high resolution. Study of surface morphology of treated detail. The use of electric-surface alloying components operating under conditions of friction and abrasionerosion wear and their restoration.
статья, добавлен 22.03.2016Defining of dimensional relationships where the aspect ratio. The building process for 3D microdevices. The features of creation surface energy high enough to maintain adhesion of the electroplated material until completion of the plating process.
реферат, добавлен 16.04.2017Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016The types of dosimeters: silicon-diode detectors, diamond detectors, liquid ion chambers and radiographic films. The spatial resolution as a key feature for next-generation dosimeters. Results using one layer of DOSIORT. Isodose curves in the test.
статья, добавлен 12.10.2013Aluminum can be considered green when its production and alloys processing are low-carbon (as well as associated with the reduced amount of other greenhouse gases, hazardous chemicals and environmental pollutants), include recycling of scrape and waste.
статья, добавлен 19.09.2024Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018Carbon nanotube diodes as part of nanotechnology and a key component of the nanotechnology revolution, which could have major implications for the future. Nanotechnology is a discipline that deals with the design, production and manipulation of materials.
статья, добавлен 19.03.2024The main factors of physical phenomena that accompany the process of power explosive effect for the development of new processes of metal processing. Industrial testing of facing technology by explosion of artificial surfaces of complex configuration.
статья, добавлен 19.02.2019Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Use of selective solvents in oil refining industry. Methods of cleaning oil raw materials. Technology of fractionation of extracts of phenol distillates, their chemical properties. Modeling the column of industrial extraction of petroleum products.
статья, добавлен 10.08.2018Types of tool materials: from high-carbon steel to ceramics and diamonds, and their use as cutting tools in the modern metal industry. Cutting tool and its characteristics: hardness, strength. Achieving an acceptable tool life before replacing it.
статья, добавлен 26.04.2019Demand for vehicles with a zero carbon footprint. Understanding the predictors of human behavior regarding the potential adoption or rejection of a technology. A comprehensive consideration of the possibilities of switching to low-emission vehicles.
статья, добавлен 20.07.2024Search for ways to reduce emissions of pollutants. Biomass as a composite material. Laboratory installation for glucose fermentation to ethanol. Study the concentration of xylose as a function of time. Process flow diagram of the synthesis of bioethanol.
статья, добавлен 23.06.2018An analysis of demand in the semiconductor industry, covering all three phases of materials: gases, liquids and solids. The study of the peculiarities of application for solids which includes a semiconductor substrate, metal, dielectric, an organic film.
книга, добавлен 14.03.2014Research process to ensure the values of the endurance limit of the material details. The establishment of correlations between the modes of machining, quality of the surface layer and the fatigue limit. The characteristics of processed material.
статья, добавлен 14.09.2016