Experimental research on heat dissipation at the hot end of semiconductor refrigeration chips

Analysis of TEC1-12705 and TEC1-12706 semiconductor refrigeration chip types with different hot heat dissipation conditions. Heat pipe heat dissipation test device for radiators. Effect of hot end heat dissipation conditions on cold end temperature.

Подобные документы

  • The types of mechanisms turning and folding blades used for power control and stabilization of frequency of rotation of the wind turbines. The dependence of the displacements of sliders and centrifugal weights on the angle of rotation of the blade.

    статья, добавлен 14.09.2016

  • Analysis of new scientific and technical knowledge about the nature of the origin of precious stones and their synthetic analogues and imitations. Review of existing technologies, modern devices for diagnostics of jewelry with inserts of precious stones.

    статья, добавлен 11.11.2021

  • Implementation of new neurotechnologies. Research of the concept of science, foresight and policy interlinking. Analysis of russian neurotechnology case. Identification and characterization of the main needs for improvements and changes in Russian case.

    магистерская работа, добавлен 04.09.2016

  • The effect of casein-stabilized metal and metal oxide nanoparticles on the in vitro growth of Scoparia dulcis L. was studied. The effect of nanoparticles on callus induction, regeneration of shoots and roots was studied. Influence on the regeneration.

    статья, добавлен 14.04.2022

  • Reasons for the growing movement to combine brain science with medicine, education, and industry. Authentication using passwords or PIN codes, and using it to log in to your device. Features of biometric authentication, its development and technology.

    статья, добавлен 09.04.2023

  • Thermosetting plastics, their irreversible chemical reaction (polymerization), including the effects of temperature and time. Bringing the resin composition to a liquid state, forcing the liquid to flow into the cavity of the desired configuration.

    статья, добавлен 10.03.2019

  • Familiarization with layout of placement of guard signaling complex systems. Research technology of modeling discrete continuous stochastic systems. Characteristics of the main methods ensuring probability of successful fulfilment of seismic sensor.

    статья, добавлен 30.01.2016

  • The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).

    статья, добавлен 07.09.2022

  • The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.

    статья, добавлен 29.11.2016

  • Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.

    статья, добавлен 30.07.2016

  • Modification of aminopolysaccharide by deacetylation of chitin from the shrimp shell using the enzyme as a biocatalyst and microwave energy. The influence of temperature and reaction time, the ratio of aminopolysaccharide to aniline on its properties.

    статья, добавлен 10.08.2020

  • The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.

    статья, добавлен 29.09.2016

  • The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.

    статья, добавлен 30.01.2017

  • The paper presents the design of experimental cells, a description of materials for construction and construction process, and preliminary results. The objective of the work is proving which of the MBT fractions function better for methane degradation.

    статья, добавлен 08.10.2020

  • Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.

    презентация, добавлен 20.10.2014

  • The compositional analysis of wastes and finding environmentally sustainable and innovative alternatives for waste disposal for tanneries. The processing and evaluation of hydrolyzed collagen and skin waste for the realization of composite materials.

    статья, добавлен 24.02.2025

  • Structure of engineering systems. A description of the statistical procedures recommended for use in reliability analysis "related" components. The choice of an appropriate probabilistic model for predicting the reliability of components of one's sibling.

    статья, добавлен 14.09.2016

  • Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.

    статья, добавлен 14.07.2016

  • The antibacterial effect of chitooligosaccharides, evaluated against various microorganisms. The oligosaccharides from chitosan and fractionated with ultrafiltration membrane and enzymatic bioreactor. The molecular weight of chitooligosaccharides.

    реферат, добавлен 07.09.2011

  • Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.

    статья, добавлен 02.06.2014

  • Cylinder shaped parts – one of the mostly used in printing presses. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered in the article. Experimental work and scientific conclusions are described.

    статья, добавлен 29.07.2016

  • Technological solutions that allow us to solve the problem of premature wear of the printing machines. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered. Experimental work and scientific conclusions.

    статья, добавлен 29.07.2016

  • An experimental study of backscattering factor for a linear accelerator Siemens Oncor Impression Plus for photon energies of 6 and 18 MV with asymmetric radiation fields. Development and implementation method for determining the backscattering factor.

    статья, добавлен 29.07.2016

  • Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.

    презентация, добавлен 30.06.2014

  • The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.

    статья, добавлен 12.06.2015

Работы в архивах красиво оформлены согласно требованиям ВУЗов и содержат рисунки, диаграммы, формулы и т.д.
PPT, PPTX и PDF-файлы представлены только в архивах.
Рекомендуем скачать работу и оценить ее, кликнув по соответствующей звездочке.