Numerical simulation of viscoelastic materials
The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.
Подобные документы
Estimation of energy release in mills of various types to understand the thermodynamic aspect of processes during mechanoactivation treatment. Modeling the motion of the balls of a mill and evaluating the generation of energy in the ball system.
статья, добавлен 07.08.2020Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013Анализ внутренних компонентов разрабатываемого противоударного планшета. Анализ методики создания эскиза печатной платы. Проектирование трехмерной модели модуля камеры. Симуляция падения корпуса планшета в программном комплексе SolidWorks Simulation.
дипломная работа, добавлен 29.06.2014Characterization of features spline approximation television pictures. Rearranged algorithm spline approximation television images detailing calculation of the coefficients which gives the possibility to improve the quality of decompressing video.
статья, добавлен 26.06.2016Calculation of the coefficients autopilot unit for homing rockets based on genetic algorithms in which the autopilot block (AB) quality parameters are considered as the criterion for evaluating the optimality of the AB. Optimality of AB coefficients.
статья, добавлен 30.04.2018An unfavorable combination of various factors leads to the occurrence of landslides, as catastrophic manifestations of processes in rock massifs. As a result, there is a threat to human life, damage and destruction of residential and industrial buildings.
статья, добавлен 16.06.2024Obtaining prototypes of hemp oil by cold pressing. Determination of mass fraction of moisture оil content measurement. Indicators of seeds' quality during long storage. Yield and quality indicators of by-products obtained in the production of hemp oil.
статья, добавлен 24.06.2022Analysis of the main causes of destruction of adhesive joints. Structural and technological stress concentrators, because of which cracks develop during operation. General characteristics of the resistance of adhesive bonding to failure at all stages.
статья, добавлен 30.04.2018Description and analysis of the characteristics of main problems to be solved in design of fixture. Examination and description of the main principles of work with the developed software to automate the modeling process and the design of the led lamp.
статья, добавлен 26.06.2016Development and value of a robotic module, whose activity will be controlled based on the perception of the image obtained from a digital camera. Features and description of the process of creating an intelligent robotic module with a camera system.
статья, добавлен 28.08.2020Analysis of the aspects of the specifications and drawings of plastics that are specific to this family of materials and processes and that are related to the realities that need to be taken into account. Cavity identification and rough indication.
статья, добавлен 10.03.2019- 112. The theoretical substantiation of constructive parameters of the vibration digging working body
The length of the channel of the vibrating digging working body is substantiated by interaction with the body of the sugar beet root during its digging. A calculation scheme for the contact of the root crop with the working organ has been constructed.
статья, добавлен 15.09.2022 Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016Integrating lignin with synthetic plastics - an innovative approach in the development of sustainable polymers. Nanofibers with antimicrobial properties - one of the innovative materials that can be effectively used in the current pandemic situation.
статья, добавлен 13.04.2022The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019The system of rest is energy-saving, with power supply from alternative energy sources intended for complex recovery of an organism in house conditions. Determine the effectiveness of panel modules on the level of stress. Application panel "Ananta 2016".
статья, добавлен 19.12.2017- 117. Starch production
Theoretical study of the basic functioning of the starch industry. The raw materials used for the а production of polysaccharide under consideration. The structure of the modified starches and dextrin. The use of the ingredient as a food additive.
презентация, добавлен 27.10.2014 - 118. Finding the conditions of hydrocarbons safe storing and transportation in tanks of different shapes
Application of the software package ConvEx in the design of storage tanks for petroleum products prone to self-degradation. Investigation of the influence of the geometric shape of the vessel on the critical temperature of storage of petroleum products.
статья, добавлен 10.05.2018 The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016Cylinder shaped parts – one of the mostly used in printing presses. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered in the article. Experimental work and scientific conclusions are described.
статья, добавлен 29.07.2016A modern house built using materials that "smell of the past, but strive for the future." The use of mechanical ventilation with dehumidification, radiant floor, photovoltaic panels with energy storage and heat pump. Creating a comfortable temperature.
статья, добавлен 04.10.2021Defining of dimensional relationships where the aspect ratio. The building process for 3D microdevices. The features of creation surface energy high enough to maintain adhesion of the electroplated material until completion of the plating process.
реферат, добавлен 16.04.2017Determination of material properties of polymeric resins. Processing and finishing operations commonly used in the manufacture of plastic products. Analysis of relative differences in the coefficient of thermal expansion and modulus of elasticity.
статья, добавлен 10.03.2019Technological solutions that allow us to solve the problem of premature wear of the printing machines. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered. Experimental work and scientific conclusions.
статья, добавлен 29.07.2016- 125. Awareness and Attitude of Latvian Construction Companies Towards Sustainability and Waste Recycling
Construction and Demolition Waste (CDW). Accepted that reliable strategies and innovative technologies need to be developed to increase the share of CDW-derived materials in new residential constructions while simultaneously minimizing future CDW.
статья, добавлен 14.03.2022